Heinz Ltd, Telford

This saucy job, just around the corner from ESH head office, involved us supplying and installing a trace heating system to frost protect a section of 2" metal pipework.

* Frost Protection Trace Heating *

Holchem, Rossendale

A leader in the speciality chemical manufacturing industry, here ESH designed, supplied and installed a trace heating system to maintain 50mm pipework at a temperature of +20°C in a minimum ambient of -20°C.

Toyota UK (Weld Shop), Derby

This was our second project for Toyota UK, this time ESH were contracted to supply and install a temperature maintenance trace heating system. The process pipework within the weld shop required maintaining above +30°C and this was achieved using our type SC constant wattage heating cable.

* Type SCB Constant Wattage Cable *

St Pauls Churchyard, London

The cathedral is one of the most famous and recognisable sights in London and was a fantastic project to be involved in. 

This was our first, of two, projects at St Pauls where on this occasion, ESH were contracted to design, supply and install the following trace heating systems:

• Provide hot water temperature maintenance of +55°C to the DHWS pipework 
• Frost protect the roof mounted 4" and 5" CHW pipes

Boots Chemists, Warrington

For this retailing giant, ESH designed, supplied and installed a trace heating system to frost protect external 28mm MDPE pipework.

Rhodes Avenue Primary School, London

The ESH type H2OWAT55 self regulating heating tape was supplied and installed to provide temperature maintenance of +55°C. The tape was installed to the underside of the HWS pipework in a straight trace configuration from the un-vented water heaters up to the thermostatic mixing valves. 

* Type H2OWAT Heating Cable *

Renshaw Foods, Liverpool

Within Renshaw Foods, a leading manufacturer of baking ingredients, ESH designed, supplied and installed a trace heating system to temperature maintain 89mm & 60mm pipework at a temperature of +50ºC.

Coventry Waste Treatment Plant

ESH were contracted to design, supply and install a high temperature trace heating system to temperature maintain five large fly ash hoppers at +110ºC. The required temperature was achieved by installing our type SC constant wattage heating cable.

* SCB Constant Wattage Cable *

Aztec Oils, Chesterfield

At this site Aztec Oils manufacture and distribute high performance lubricants. The project scope for ESH was to design, supply and install a process temperature maintenance system to maintain +60ºC in a minimum ambient temperature of -20ºC. 

Leeds Academy

Within this modern academy, ESH supplied and installed a frost protection system to the external BCWS pipework. The system was designed using type VC constant wattage heating cable.

* VCB Constant Wattage Cable *